
V Electric operating tableV WITHOUT constant temperature system
Specification Size: Length 1400* Width 650* height
800/1100(mm)
Product features:
1, table thickened 304 stainless steel material, anti- oxidation, no
rust, corrosion resistance, Long and durable;
2, operating table lifting height using electric control, low
noise, strong driving force, performance
More stable;
3, the operating table before and after two-way tilt ≥45°, are
achieved by electric push rod, button
Operation, safe and reliable;
4. The left and right sides of the operating table can be
tilted ≥45°, respectively, and fixed by mechanical manual
control
Can form a V position;
5. The middle of the operating table is equipped with a
movable sink to facilitate the inflow of dirt on both sides
of the table
A sink;
6. Configure infusion rack, instrument tray and mesh rack
7, equipped with card rope buckle can be fixed pets, simple,
convenient and firm


V Electric operating tableV WITH constant temperature system
An electric operating table with a constant temperature system is a medical device designed to provide a stable and comfortable environment for patients during surgical procedures. The table is equipped with an electric motor that allows for precise height adjustment, while the constant temperature system helps maintain a consistent temperature on the table surface, which can be beneficial for certain types of surgeries.
Electric operating Table
Size: Length 1350* Width 670* height 500/1100(mm)
Product features:
1. The operating table adopts ultra-low cross support
design, 201 material, thickness of 1.5mm, large lifting
range, large load;
2, table thickened 304 stainless steel material, 1.1mm
thickness, oxidation resistance, no rust, corrosion
resistance, durable; All solder joints are fully welded and
reinforced with fine steel bearings. The maximum bearing
capacity of the operating table is 100KG. 3. The operating table is
driven by silent linear motor, operated by keys, with smooth lifting
and low noise;
4, the table is equipped with stainless steel mesh frame, all 304
material, with 8 round bars and 4 round bars
welded mesh frame, convenient drainage cleaning, convenient pet
postoperative disinfection and cleaning
5, set pet hooks on both sides, convenient binding fixed
pets;
6, the configuration of infusion rack, instrument tray, waste liquid
bucket, mesh rack each one


Electric operating Table With constant temperature system
An electric operating table with a constant temperature system is a medical device that provides precise positioning and a controlled thermal environment during surgical procedures. The table's electric motors enable smooth adjustments, while the integrated temperature control system helps maintain a consistent surface temperature, enhancing patient comfort and potentially improving surgical outcomes in specific procedures.
Electric Pet Grooming Table
Dimensions: Length 128.5 cm * Width 64 cm * Height 32.5/100.5 cm
Product Features:
The operating table features an ultra-low cross-support design,
offering a large lifting range and load capacity.
The table is driven by a silent linear motor with foot-pedal operation,
ensuring stability and low lifting noise.
The tabletop is made from 1.8 cm density board, with black anti-slip
and anti-static footpads, making it simple and durable.
It includes a foldable stainless steel fixed arm, easy to disassemble
and adjust, along with a woven rope for securing pets.
Equipped with a foldable arm and woven rope.


Cat Catheter without stylet
A cat catheter without a stylet is a flexible tube used to drain urine from the bladder of a cat. Unlike catheters with stylets (which have a stiff wire inside for insertion), these catheters are typically softer and more pliable, making them potentially easier to insert and less likely to cause discomfort or trauma to the urethra.
Size:
1.0mm
1.3mm
Cat Catheter with stylet
A cat catheter with a stylet is a flexible tube used to drain urine from a cat's bladder. It contains a thin, flexible wire (the stylet) within its lumen. The stylet provides rigidity and support during insertion, making it easier to navigate the urethra. The stylet is typically removed once the catheter is properly positioned in the bladder.
Size:
3Fr Side open
3Fr End open


Cat Catheter with stylet
A dog catheter is a flexible tube inserted into a dog's urinary tract to drain urine. They come in various types, including those with or without stylets (internal wires for support). Catheters are used to treat urinary obstructions, collect urine samples, and administer medications directly into the bladder.
Size:
1.3mm
1.6mm
2.0mm
2.6mm
Silicone Foley Catheter
Silicone Foley catheters are medical devices used to drain urine from the bladder. Made from soft, flexible silicone, they are designed to be comfortable and less irritating than latex catheters. They are often used for long-term indwelling catheterization due to their biocompatibility and reduced risk of encrustation.
Size:
6.0mm FR
8.0mm FR
10.0mm FR


Silicon Flushing Catheter with Balloon
A silicone flushing catheter with a balloon is a medical device used to irrigate and drain the bladder. The silicone material is gentle on the urethra and less likely to cause irritation. The balloon at the tip helps to anchor the catheter in place, ensuring proper placement during the flushing procedure.
Size:
6.0mm FR
8.0mm FR
10.0mm FR

Silicon Flushing Catheter with Balloon
A silicone flushing catheter with a balloon is a medical device used to irrigate and drain the bladder. The silicone material is gentle on the urethra and less likely to cause irritation. The balloon at the tip helps to anchor the catheter in place, ensuring proper placement during the flushing procedure.
Size:
6.0mm FR
8.0mm FR
10.0mm FR
Stainless Steel Pet Four Cages
Size: Length 1220* Width 700* height 1580 (mm)
Product features:
1, the overall use of 304 stainless steel material, no rust, oxidation resistance, corrosion resistance, long
Durable;
2. The main body is made of 1.0mm thick plate, and the
fouling plate is welded with 0.8mm thick plate
Come into being;
3, the pet cage door is composed of solid diameter
8mm/6mm stainless steel bar, foot
The net frame is composed of stainless steel bars with a
diameter of 8mm/4mm. 4, the door lock adopts the pull type design, automatic
locking, easy to use, fast and safe
Can be good;
5. Movable partition is designed in the middle of the
lower cage to pull open the variable large pet cage;
6, the bottom casters are covered universal silent wheel, brake wheel, wear-resistant, Quiet, easy to move and fixed position;
7, the pet cage adopts rounded corner design, convenient cleaning, overall bearing strong, strong
Durable;
8. Equipped with two infusion stands and four stainless
steel pet recording boards.


Stainless Steel Pet Cat Carrier
Specification Size: Long 980 deep 550 high 1750 (mm)
Product features:
1, the overall use of 304 stainless steel material, no rust, oxidation resistance, corrosion resistance, long
Durable;
2. The main body is made of 1.0mm thick plate, and the fouling
plate is welded with 0.8mm thick plate
Come into being;
3. The pet cage door is composed of stainless steel bars with a
solid diameter of 8mm/6mm;
4, the door lock adopts the pull type design, automatic locking, easy to use, fast and safe
Can be good;
5. Cat springboard and middle partition board are made of high
strength acrylic plate, and the middle partition board is pumped
Type design, clean and sanitary, easy to operate;
6, the bottom casters are covered universal silent wheel, brake
wheel, wear-resistant, Quiet, easy to move and fixed position;
7, the pet cage adopts rounded corner design, convenient
cleaning, overall bearing strong, strong
Durable;
8. Equipped with an infusion stand and two stainless steel pet
recording boards. 9. Each group has two floors above and below, and each floor
has its own leisure area, food area and health area.
Stainless Steel Pet Cat (No Net and No Plate)
Specification Size: Length 1220 depth 700 height 1580
(mm)
Product features:
1, the overall use of 304 stainless steel material, no rust, oxidation resistance, corrosion resistance, long
Durable;
2, the main body is welded with 1.0mm thick plate;
3, pet cage door is made of solid diameter 8mm/6mm
stainless steel bar, 4, the door lock adopts the pull type design, automatic
locking, easy to use, fast and safe
Can be good;
5, the internal standard with detachable cat springboard, optional litter box;
6, the bottom casters are covered universal silent wheel, brake wheel, wear-resistant, Quiet, easy to move and fixed position;
7, the pet cage adopts rounded corner design, convenient cleaning, overall bearing strong, strong
Durable


Stainless Steel Pet Oxygen Tank Cage
Size: Length 1220* Width 700* height 1810 (mm)
Product features:
1, the overall use of 304 stainless steel material, no rust, oxidation
resistance, corrosion resistance, long
Durable;
2. The main body is made of 1.0mm thick plate, and the fouling plate is welded with 0.8mm thick plate
Come into being;
3, the pet cage door is composed of solid diameter 8mm/6mm
stainless steel bar, foot
The net frame is composed of stainless steel bars with a diameter of
8mm/4mm. 4, the door lock adopts the pull type design, automatic locking, easy to
use, fast and safe
Can be good;
5. Movable partition is designed in the middle of the lower cage to pull
open the variable large pet cage;
6, the bottom casters are covered universal silent wheel, brake wheel, wear-resistant, Quiet, easy to move and fixed position;
7, the pet cage adopts rounded corner design, convenient cleaning, overall bearing strong, strong
Durable;
8. Equipped with 1 infusion stand. 9. Equipped with 4 warm light lamps, 1 oxygen hatch door, 16 power
interface, dry and wet temperature
Display and leakage protection. 10, thermostat controller, over temperature automatic power off, safe
and reliable
Stainless Steel Pet Six Cages
Specification: Length 1830* Width 700* height 1580 (mm)
Product features:
1, the overall use of 304 stainless steel material, no rust, oxidation resistance, corrosion resistance, long
Durable;
2. The main body is made of 1.0mm thick plate, and the fouling
plate is welded with 0.8mm thick plate
Come into being;
3, the pet cage door is composed of solid diameter 8mm/6mm
stainless steel bar, foot
The net frame is composed of stainless steel bars with a
diameter of 8mm/4mm. 4, the door lock adopts the pull type design, automatic locking, easy to use, fast and safe
Can be good;
5. The lower cage is provided with a movable partition in the
middle to open the variable large pet cage;
6, the bottom casters are covered universal silent wheel, brake
wheel, wear-resistant, Quiet, easy to move and fixed position;
7, the pet cage adopts rounded corner design, convenient
cleaning, overall bearing strong, strong
Durable;
8. Equipped with three infusion stands and six stainless steel pet
recording boards


Endotracheal Tube With cuff
An endotracheal tube (ETT) with a cuff is a medical device used to maintain an open airway during anesthesia, surgery, or critical illness. It is a flexible tube inserted through the mouth or nose into the trachea (windpipe). The cuff, an inflatable balloon near the tip of the tube, seals the airway around the tube to prevent air leakage and ensure proper ventilation.
Sizes:
1.0mm
1.5mm
2.0mm
2.5mm
3.0mm
3.5mm
4.0mm
4.5mm
5.0mm
5.5mm
6.0mm
6.5mm
7.0mm
7.5mm
8.0mm
9.0mm
10.0mm
11.0mm
12.0mm
13.0mm